Gas control block SIT 830 Tandem 0830030

SIT 830 is suitable for the installation in devices with automatic flame monitoring with or without intermittent pilot burner. All fittings are accessible from the top. The valve can be mounted in any position.

Description:
Double safety solenoid of class B with silent operation.
Pressure controller of group I
Inlet and outlet are prepared for flange connection. Pilot gas outlet for pipes with Ø 4 mm, Ø 6 mm or Ø 1/4" throttle screw for adjusting the gas flow to the pilot burner. Gauge connection at inlet and outlet. Inlet filter and pilot gas filter. Thread connection M 8 x 1 for pipe with ∅ 4 mm pipe for possible connection of the breather opening of the pressure controller to the combustion chamber.

Operation:
Gas flow
Both solenoid valves are connected to the main gas pipe in series. They are
supplied through a single three-pole plug or a standard plug.
They have the following features:
The closing force is independent from the mounting position. The only electric plug for both coils makes wrong connections impossible, so valve assembly is easy.

Pressure control:
The pressure is controlled by a direct controller adjustable between 3 and 50 mbar.

Note:
Code: 0830030
63AP7060/04